Busch-Jaeger 6701 Betriebsanleitung Seite 37

Disconnecting and resetting
devices
24 Disconnecting and resetting devices
Disconnecting and resetting single devices
In operating mode "E", specific assignments can be
deleted.
1 Set the selector on the 6701
Einbauempfänger WaveLINE
receiver to "E". The LED flashes
red (fig. 3-2).
2 Press the programming button
(1). The LED lights up red (2).
3 Set the selector on the Busch
Watchdog
transmitter to "P". The status LED
of the watchdog lights up for
approx. 10 sec. (slightly delayed).
®
220 WaveLine
ENG
S
R
P
37
E
EA
1+2