Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Dear customer,
We are delighted that you have decided to purchase our multi-
purpose table.
If you have any questions, please contact customer service via our
website: www.service-shopping.de
Proper use
•
This table is suitable for use as a side table, dining table, work
table etc.
•
Only use the product as instructed. Any other use is deemed
improper.
•
The product is designed for private use only and is not inten-
ded for commercial use.
•
Defects arising due to improper handling, damage or attempts
at repair are excluded from the warranty. This also applies to
normal wear and tear.
Safety instructions
■
Risk of suffocation! Keep the packaging material away from
children and animals.
■
Caution: Risk of crushing your fi ngers, hands and other body
parts! Be careful when assembling, dismantling and using the
product.
■
The product is not a toy! Make sure that children don't climb
the product and that they don't sit down on the table top!
■
The product is not suitable for use as a diaper-changing table.
■
Never stand or sit on the table!
■
Do not place any heavy objects on the table top. The product is
designed for a maximum load bearing capacity of 11 kg!
■
Only use the product in closed indoor areas. It is not suitable
for outdoor use.
■
Always place the product on a level, solid, clean and dry sur-
face.
■
Verify if the product has been properly assembled each time
before using the device.
■
Keep the product away from heat sources (e.g. fi replaces,
ovens, candles etc.)
■
Do not subject the product to extreme temperatures, severe
changes in temperature or direct sunlight.
Product contents
•
1 table top
•
1 U-shaped tube
•
1 metal bracket for angle adjustment
•
2 L-shaped table legs
Assembly
1. Unpack the product. Check that the product contents are
complete and that they do not exhibit any transport damages.
Should you identify any transport damages, do not use the
product (!), instead please consult the customer service.
2. Insert the U-shaped tube in the
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •
*) Calls to German landlines are subject to charges. The cost varies depending on the service provider.
Product number: Z 06001
large hooks on the bottom side of
the table top. Make sure that the
tube locks into place properly.
Customer Service / Importer:
Use
1. Set the desired height of the table. You can chose from six
different height settings. To change the height setting, push
in the metal buttons on the sides of the table leg and set the
table to the desired height. Make sure that the metal buttons
correctly lock into the holes of the table leg to ensure a safe
table position.
2. Set the angle of the table top. You can choose from three dif-
ferent angle settings. Insert the metal bracket on the bottom
side of the table top in one of the small hooks to set the table
top in a horizontal position or in a slightly tilted angle. Make
sure that the metal bracket correctly locks into the hook to en-
sure a safe position of the table top.
3. A beverage holder is located on the side of the table top which
you can extend and retract if necessary.
Cleaning and care
ATTENTION!
■
When cleaning, do not use any scouring or abrasive cleaners.
They could damage the surface.
•
Clean the table with warm water and a mild cleaner as needed.
Then dry the table thoroughly.
•
When not in use, store the product in a dry, clean area that is
not accessible to children and animals.
Disposal
The packaging material is recyclable. Dispose of the pack-
aging in an environmentally-friendly manner and make it
available to the collection service for recyclable materials.
Also be sure to dispose of the product in an environmental-
ly-friendly manner. For more information, please contact the
administration in your community.
All rights reserved.
3. Afterwards, insert the metal brack-
et in the intended holes of the U-
shaped tube and fi x the other side
of the bracket in the small hooks for
adjusting the angle of the table.
4. Insert the L-shaped supports in the
U-shaped tube. Ensure that the L-
shaped supports are located under
the table top later on and that the
metal buttons of the U-shaped tube
lock into the holes of the supports
before setting up the table.
•
The supports can be folded in to safe
space when stowing the table. Push
in the metal buttons on the sides of
the table legs, set the table to the
lowest height and turn the table legs
by 90° until the metal buttons lock
into place.
✆
+49 38851 314650 *)
Z 06001_V2_04_2016
Instructions
Werbung
