Introduction; Getting Started; Reset; System Setting - LEXIBOOK NTL460 Bedienungsanleitung

INTRODUCTION

Thank you for purchasing this NTL460 4-language translator. This product has been
designed to help you translate words in English, French, Spanish and German.
The database includes 30,000 words for each language, as well as 150 conversational
phrases per language, which have been grouped into 10 different categories for easy
access and use. Under normal use the NTL460 is designed to give many years of
service. Please follow these instructions carefully to ensure your product operates correctly.

GETTING STARTED

Removing the battery tab
Before you start using the unit, carefully remove the battery tab located at the rear of the unit:
1. Unscrew and remove the battery compartment lid on the back of the unit.
2. Take note of the correct polarity (+/- signs), and remove the battery.
3. Remove the battery tab, and replace the battery according to the polarity.

Reset

Reset the unit before using it for the first time:
- Press reset button on the back of the unit with a small thin object i.e. the end of a
paper clip. "RESET?" will be displayed onscreen.
- Press ENTER to confirm.
Notes:
- If a function key is pressed, reset will cancelled, and the function will be activated.
- Press any other key to exit the reset mode, and enter Home Time mode.
Opening and closing the unit
To open the unit, press the front centre button to release the catch.
To close it, gently push the lid down.
Before switching the unit on, make sure you remove the clear film label from the LCD
screen by pulling the tab.

SYSTEM SETTING

Press SHIFT + (MENU) to enter the system settings mode. Use and
the corresponding number to scroll through the following settings:
1. KEY TONE: Press ENTER for key tone settings. The default key tone status is on,
press or to turn it on and off.
4
NTL460IM0036.indd 4-5
2. AUTO OFF:
3. PASSWORD: Press ENTER to access this function. For more details, please refer
4. CONTRAST:
5. LANGUAGE: Press ENTER to select the language of the prompts. The default
6. CHIME:
7. SCHD ALARM: Press ENTER for scheduled alarms settings. Press
8. HOME CITY: Press ENTER for home city name settings. You can input your city's
9. MEMORY:
SWITCHING BETWEEN CAPITALS AND LOWER CASE
Press SHIFT +
letters.

CHANGING CHARACTERS AND NUMBER INPUT

In TELEPHONE, MEMO and SCHEDULE modes, press the NUM key once to switch to
number input. Press again to return to character input.
or press
Press ENTER for auto off time settings. The default auto off time is
5 minutes, press or to scroll through the following selection:
3 MINUTES, 5 MINUTES, and 7 MINUTES.
to the section SECRET MEMORY).
Press ENTER for contrast settings. The default contrast is 6.
Press or to scroll from 1 to 8.
language is ENGLISH. Press or to scroll as follows:
ENGLISH, FRANÇAIS, DEUTSCH, ESPAÑOL.
Press ENTER for the hourly chime settings. The default chime status
is OFF, press or to turn it on and off. When the chime is set
on, the chime icon is displayed, and an alarm will sound every hour.
it on and off.
name to edit the city displayed on the home time screen.
Press ENTER to display the available memory.
(CAPS) to switch the keyboard between capital and lower case
or to turn
5
20/02/2006 15:01:10