Working Advice - Bosch Professional GFR 25 Originalbetriebsanleitung

OBJ_BUCH-2143-003.book Page 17 Friday, October 7, 2016 5:44 PM

Working Advice

Should the cutting blade jamb in long or dense grass, simply release then re-engage the switches.
This will activate the auto-release function that releases the jamb by quickly reversing the motor for a short time.
For optimum performance and finish always use correct cutting accessory as shown below.
Cutting system Usage application area
Grass
2.4 mm line
2.7 mm line
3.0 mm line
Troubleshooting
d.c.
Problem Possible Cause
Blade guard can not be Incorrect assembly
mounted over cutting
blade
Machine fails to operate Battery discharged
Battery too hot/cold
Bosch Power Tools
Light vegetation Heavy vegetation
Corrective Action
Remove cutting blade and mount blade guard
first
Recharge battery
Allow to cool/warm
English | 17
Bushes, thin trees
F 016 L81 659 | (7.10.16)