Troubleshooting - ClickTronic HC 418 Bedienungsanleitung

Manual
avoided at all times.
• Do not expose the device to extremely high temperatures, dripping
or spraying water, strong vibrations, or great mechanical strain.
• Do not put sources of naked flames such as candles on or next
to the device.
• Ensure sufficient ventilation of the power supply and the switch
during operation. Do not cover the units with newspapers, sheets,
curtains or similar.
Features:
- 1 HDMI input/8 HDMI outputs with HDMI Lock System
- fully support 1080p HDTV
- resolution: 480i, 480p, 720i, 720p, 1080i und 1080p
- HDMI 1.2a and HDMI 1.3 compatible
- HDCP compatible
- built-in signal amplifier/equalizer for enable longer HDMI cable
- gold-plated contacts
- professional metal-housing design
Content of Package
- DC 5 V power adaptor
- HC 418 Splitter
- User's manual
Connect the HC 418 splitter to your devices
1. Connect the HDMI cable from the HD source to the input port
of HC 418 splitter.
2. Connect the HDMI cables from your displays to the outputs
of the HC 418 splitter.
3. Standard resolution of outputs set up: Please set the output
resolution of the source device first, and make sure the resolution
can be displayed on all connected display devices. For example,
if you set the output resolution of the source device to 1080p,
please make sure all the display devices can display 1080p
resolution. If any connected display device can not support 1080p
resolution, the display device will show no pictures.
4. Plug the 5 V DC power supply into the HC 418 splitter.
When connections are completed, the HDTV signal will be d
istributed to each HDTV

Troubleshooting

No image:
• Check all plug-in connections.
• Check the connecting lines Is any line damaged?
• Turn off the HC 418 by using the main switch on the rear side of
the device, unplug the power supply and wait about 5 minutes.
Then restart the device as previously described in this manual.
7