Care And Maintenance - Bosch SGI3312 Gebrauchsanweisung

en
Cancel programme (Reset)
Only when the master switch is ON.
Press the A and C programme
buttons simultaneously and hold them
pressed for approx. 3 sec.
The programme continues for approx.
1 min.
The PROGRAMME END indicator and
the indicator for the programme that
has just been terminated light up.
Set main switch
Close the detergent compartment
To restart the dishwasher, set main switch
to ON again and select desired
1
programme.
Changing the programme
It is possible to change the programme
within 2 minutes after you have switched
the dishwasher on.
Should it be necessary to change the
programme after this period, the
programme cycle that has already been
begun (e.g. washing) will be completed
first of all.
36
to OFF.
1
30

Care and maintenance

Regular inspection and maintenance of
your appliance helps to prevent problems
from occurring. This saves time and
aggravation. You should therefore
carefully inspect the inside of your
dishwasher from time to time.
Overall condition of appliance
Check that no grease or scale has
accumulated on the inside of the
dishwasher.
.
If you discover any deposits:
Clean the interior of the dishwasher
thoroughly with a detergent solution.
Special dishwasher salt
Check the LOW SALT indicator
up with salt, if required.
Rinse-aid
Check the LOW RINSE-AID indicator
on the front panel or the level indicator on
the rinse-aid container
rinse-aid, if required.
Filters
The filters
25
food or other objects from getting inside
the pump. This residue can occasionally
clog up the filters.
The filter system consists of a filter
cylinder, a flat fine filter and, depending on
the model, a microfilter (*).
Inspect the filters for obstructions every
time the dishwasher has been used.
By unscrewing the filter cylinder, you
can remove the filter system. Remove
any food remnants and clean the filters
under running water.
4
. Top up with
29
prevent larger remnants of
. Top
5