Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.0
Connection and Operation
1
Connect the HDMI Source ( such as DVD, PS3, STB ) to the input of the sender.
2
Connect the output of Receiver to HDTV display.
3
Use a Cat5e/6 cable up to 100m to connect the Sender and Receiver.
4
Plug one power supply into the Sender and the other into the Receiver.
5
Power on the HDTV display and HDMI source.
Note: It is recommended to use one continuous run Cat5e/6 cable from one end to the other. In some cases,
connecting through a patch connector might not work.
Attention: Insert / Extract cable gently.
5.1 Connection diagramm
Subject to change!
User Manual
11
Werbung
Inhaltsverzeichnis
