Using The Camera; Installing The Batteries - Intova SP10 Benutzerhandbuch

Effect (Playback)
Date Stamp
Quick View
Movie Size
White balance
Sounds
Frequency
Power Save
Language
Date/Time
Format
Reset All
Version
Note: The camera will remain on the last setting when it is turned off.

5. Using the camera

5.1 Installing the batteries

1. Open the battery door.
2. Insert 2 x AAA alkaline batteries into the camera.
3. Close the battery door.
B&W/Sepia/Negative/Mosa
ic/Red/Green/Blue
On/ Off
On/ Off
VGA 640 x 480
QVGA 320 x 240
Auto
Daylight
Cloudy
Tungsten
Fluorescent
Off/On
50Hz / 60Hz
Off / 1Minute / 3 Minutes
English/German/Italian/
Portuguese/French/Spanis
h/ Japanese
YY/MM/DD;DD/MM/YY
MM/DD/YY;
Yes/ No
Yes/ No
Date stamp setting
Quick view setting
Video resolution setting
Automatic white balance
White balance selected for
daylight conditions with good
sunlight
White balance selected for cloudy
conditions
White balance selected for
tungsten lighting
White balance selected for
fluorescent lighting
Microphone
Select power frequency in your
location
Auto power off selection
Display language selection
Date or time setting
Format the memory location
selection.
Reset all settings
See the firmware version