Settings - GLP Force 120 Betriebsanleitung

Setup
Ebene 2 Ebene 3
Normal
DMX Mode
High
Resolution
DMX Input Wired DMX

7.2.2 Settings

Ebene 2 Ebene 3
Error
Blackout
Shutter
No DMX
Blackout
Save
Init Positions
Reset
Linear
Dimming
Curve Soft
Extra Soft
Hold
DMX hold Off
Fade Out
Set 582-618
PWM
Hz, 1200Hz,
Frequency
2400Hz
Contrast
Brightness
Display
Blackout
Time
2018-02-01
Ebene 4 Ebene 5
Ebene 4 Ebene 5
ON / OFF
ON / OFF
0 - 50 -100 %
0 - 100 %
1 - 10 -30 s
Betriebsanleitung Stage Propeller - Force 120
Wert Beschreibung
Use wired DMX as input
Wert Beschreibung
Light output is stopped
if an error occurs
Light output is stopped
if DMX fails for 3
seconds
Save current positions
as initial positions after
reset without DMX
Reset initial positions
after reset without DMX
Set the desired
dimming curve
Last DMX values are
hold if DMX fails
Fixture blacks out if
DMX fails
Last DMX values are
hold if DMX fails
Sets the LED PWM
frequency
Contrast of the display
Brightness of
the display (Auto
Brightness has to be
disabled)
Time after which the
display blacks out after
last keystroke (Auto
Blackout has to be
enabled)
Bedienung
Seite 11/20