Please mount at your opinion as illustrated in figure 1.3 using screws fixtures supplied with the
units.
figure 1.3
CAUTION:
The unit itself will be heated because of its high power.
Therefore, please leave room around the unit in mountig and while in use, and do not put things on
the unit.
Output Power
Frequency response
Input sensitivity
Signal ratio
Speaker impedanz
Subwoofer frequency
Power supply
Dimension
Accesory
Mounting
Specification
90W x 2
High power amplifier 2000W Max (MONO)power
20Hz-20KHz at +1dB
High: 1.0-2.0V impedance 100 Ohm
Low: 0.1-1.0V impedance 10 Kilo-Ohm
Better than 95 dB
4-16 Ohm
adjustable 30Hz-250Hz
DC 14.4V
250 x 245 x 52mm
Screw set & spare fuse