LEXIBOOK BT900 serie Bedienungsanleitung Seite 18

Re-pairing
When the tower or Bluetooth
1. Switch on the Bluetooth
2. The sound tower automatically finds the last device it was paired with.
Notes:
• The Bluetooth
• Make sure the effective distance between the Bluetooth
• Interference may occur during playback when using the Bluetooth
1. Connect one end of the AUX in cable to the AUX IN jack located on top of the
2. Turn the tower on, then press MODE button to select AUX IN. The mode
3. Connect the other end of the AUX in cable to your player.
4. Choose an audio file on your device and then press Play button to play the file.
Note: When your speaker is in AUX IN mode, the DOWN, UP, PLAY/PAUSE and
PAIRING buttons on the top panel are not available.
BT900seriesIM1095_24feb_V07.indd 18
®
®
tower only connects to one device at a time.
speaker is within 10m.
near other wireless devices. If playback through Bluetooth
®
move the Bluetooth speaker and the playback device to a different location,
or use the 3.5mm AUX IN jack instead of the Bluetooth
sound tower.
indicator lights up purple.
®
mode has been switched off:
tower and press MODE button to select Bluetooth
AUX IN SETUP
18
®
mode.
®
device and the tower
®
function
®
is problematic,
®
function.
24/02/2015 10:57 AM