EisSound In-Wall Bluetooth Installation Und Betriebsanleitung Seite 6

In-Wall Bluetooth ® Audio Receiver
3.2. Once the blue led fl ashes you are ready to pair.
The Module remains in pairing mode for one minute.
If the Bluetooth device is not connected during this
time, the Module will automatically turn off and you
must repeat the process again.
To pair, go to the Bluetooth settings in your Bluetooth
device (Smartphone, tablet, PC, etc.) and follow the
respective search procedures. The Module will send its
identifi cation code (KINGBT-XXXX) to your Bluetooth
device. This is the moment to pair. This step will only
be necessary the fi rst time for each Bluetooth device.
Now simple connect and play your music Your
Bluetooth device will control all features such as
choosing the song, play, pause, volume...
Once the connection is established the blue led will
stop fl ashing and remain ON while the Bluetooth
device is being used and within range of coverage
(approx.10 meters).
3.3. The Module will automatically turn OFF 1 minute
after you switch off the Bluetooth setting on your
Bluetooth device or you distance yourself from the
range of coverage.
3.4. Whenever an external audio source is connected
to the jack input, the Module automatically turns ON
(red led). The external audio source overrides the
Bluetooth mode.
6
Installation & User Manual
Pair
Bluetooth
PEUGEOT not connected
PARROT KIT
not connected
KINGBT-0001 not paired
Turn Off
Bluetooth
PEUGEOT not connected
KINGBT-0001 connected
PARROT KIT not connected
2003
4"
External audio input
EN
Connected
Bluetooth
PEUGEOT not connected
KINGBT-0001 connected
PARROT KIT not connected