Konig Computer CMP-REMRACK15 Benutzerhandbuch Seite 2

1. Packaging contents
CMP-REMRACK10 (WHITE)
CMP-REMRACK15 (BLACK)
CMP-REMRACK30 (WHITE)
CMP-REMRACK35 (BLACK)
- 3.5" IDE HDD Removable Rack
- Manual
- Screws
- Security Lock Key
CMP-REMRACK60 (WHITE)
CMP-REMRACK65 (BLACK)
- 3.5" S-ATA HDD Removable Rack
- Manual
- Screws
- Security Lock Key
2. Hardware installation
- Make sure the "Key Lock" is in the "ON" position after
installation of the removable rack.
- If the HDD is not working after you turn on the power, check
the power and data cables for any faulty connections.
- Mind not to turn off the "Key Lock" or pull out the removable
rack while the system is working. This may cause loss of
data or damage to the HDD.
Step 1:
Turn off the "Key Lock" and take out the inner box.
Step 2:
Open the upper cover and connect the power and data cable of the
HDD.
Step 3:
Use the screws to connect the HDD to the frame and close the upper
cover.
ENGLISH