myStrom Powerline 500 Connection-Kit Installationsanleitung Seite 3

Quick-Start
Powerline Installing the adapters
Connection-Kit
500 Mbps Chipset
Important
Plug the adapters directly into the
Installation manual
wall power socket to reduce interferences.
Istruzioni d'installazione (retro)
Manuel d'installation (2ème dépliant)
Installationsanleitung (2-tes Faltblatt)
myStrom Powerline LAN adapters are
plug & play – no configuration necessary –
connect and you are ready to go!
myStrom AG
Alte Tiefenaustrasse 6
3050 Bern / Switzerland
www.mystrom.ch
The adapter in
detail
Ports, button and LED
Plug one Powerline adapter directly into the
wall power socket next to the DSL-/Fiber-
Gateway.
Connect the adapter and the DSL-/Fiber-
Gateway using the provided network cable.
LED
Off
White
Blinks white fast
Blinks white slowly
Blinks red
DSL-/Fiber router
Plug the 2nd Powerline adapter directly into
any wall power socket next to the device you
Ethernet-Port
want to connect.
Connect your DSL-/Fiber-Gateway or any other
Connect the Powerline adapter to any Internet
device with an Ethernet port (e.g. PC, Internet-TV-Box
device (e.g. PC, Internet-TV-Box or game
or game console)
console) using the provided network cable.
e.g. TV-Box
Button
Pairing
The LEDs of both adapters light up Reset
continuously in white as soon as the Powerline
connection is established. Your device is now
connected to the Internet.
All
done!
Troubleshooting
tips
Reconnect the adapters to
each other (Pairing)
In case the adapters no longer communicate with
each other or have been reset, you have to pair them
again. To execute the Pairing process, plug the
adapters directly into the wall sockets in the same
room.
Push the
with the DSL-/Fiber-Gateway for 2 seconds.
The LED starts to blink white.
If it does not blink, please repeat this step.
Not powered
Powerline connection OK
Pairing Mode
Eco/Energy Saving Mode
No Powerline connection
Push the
seconds.
The LED starts to blink.
If it does not blink, please repeat this step.
.
The LEDs of both adapters light up
continuously in white as soon as the Powerline
connection has been successfully established.
If the Pairing was not successful, please try
Reconnect the adapters or connect them to an
existing Powerline network – press 2 s again. And before Pairing them again, please
reset both adapters.
Sets the adapter to its factory setting. Pairing is
lost – press 10 s
In order to do so, press the
adapter for 10 seconds.
FAQ and Support
Always connect the Powerline adapters to the wall
socket - why?
Powerline adapters react sensitively to
interference sources that are also connected
to your electrical network. Those interference
sources can be power adapters, chargers
etc. When you plug the Powerline adapters
directly into the wall socket and then connect
button of the adapter connected
the devices to the Powerline adapter, the
interferences are minimized thanks to the
integrated filter - so the adapters work more
reliably. For this reason the adapters cover all 3
plugs of your wall socket.
Possible interferences
Interferences occur mainly when you are using
the following devices - microwave oven, hair
dryer, vacuum cleaner, iron, power drill ...
sec.
Those interference sources can lead to a brief
interruption of the connection or - in case you
are watching Internet-based TV - to a sound or
picture freeze.
Powerline is not working
The good functioning of Powerline strongly
depends on the existing electrical network. If
the adapters are not working, plug 2 adapters
to wall sockets in the same room. If the LED
lights up continuously in white, the Powerline
button of the 2nd adapter for 2
adapters are working without any problems. The
reason is most probably your electrical network
that may contain old fuses or phase jumps. In
this case your electrician might be able to help.
Otherwise you can return the adapters after 14
days and get your money back.
You can find more information about using or
troubleshooting the Powerline adapters online on
www.mystrom.ch/en/help/faq
sec.
Support
If you have a general question please use our
contact form on www.mystrom.fr/en/help/
contacts
button of each
V8 – 01.2015