Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3
Functions and confi gurations – only for qualifi ed professionals
3.1 Functions
3.1.1 Overview (table)
Function
Description
Switch
Button function
Button
ON/OFF at the press of a button
Timer A
Active for set time after pressing button
Timer B
Timing activated after pressing button; deactivation by
pressing button again
3.1.2 Enable (Fig. 3)
The input in the control panel is only transmitted to the output if 230Vac are exerted on the ENABLE input.
Activation via S2.1.
3.2. Functions confi guration
3.2.1 Button
The output is only active if the button on the control panel is pressed.
S1.3-S1.8 and S2.2-S2.8 have no impact on the function
3.2.2 Switch
The output acts like a switch. The output is activated at the press of a button until the button is pressed again.
S1.3-S1.8 and S2.2 –S2.8 have no impact on the function.
3.2.3 Timer A (Fig. 1)
The output remains active for a set time after the button is pressed. The timer can be cancelled by pressing the
button again. The minimum settable time is 1 sec.
Switch
S1.3
Position
Value
ON
1
OFF
0
Calculation of time:
Unit:
switching from minutes to seconds
Multiplier:
the number set via the values is multiplied by 10
Value:
setting of the number. Switch positions are added up. For ON the respective number is added,
for OFF 0 is added. 1 must be added to the set value.
Example: duration 30 secs.
Switch
S1.3
Position
OFF
0
+
1+
0
+
WE DO IT FIRST.
Installation and usage instructions
S1.4
Value
2
0
S1.4
S1.5
ON
OFF
2
+
0
+
2
+
0
+
S1.1
OFF
ON
OFF
ON
S1.5
S1.6
Value
Value
4
8
0
0
S1.6
S1.7
S1.8
OFF
ON
ON
0
X
x 10
Sec.
0
=3
x 10
→30 Sec.
p. 5/10
S1.2
Point
OFF
3.2.1
OFF
3.2.2
ON
3.2.3
ON
3.2.4
S1.7
S1.8
Multiplier
Unit
x 10
Sec.
x 1
Min.
EN
Werbung
Kapitel
Inhaltsverzeichnis
