Power Tool Use And Care; Additional Safety Rules For Blower Vacs - Okay LS 2615 Gebrauchsanweisung

Power tool use and care

• Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at
the rate for which it was designed.
• Do not use the power tool if the switch does
not turn it on and off. Any power tool that
cannot be controlled with the switch is danger-
ous and must be repaired.
• Disconnect the plug from the power source
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
• Store idle power tools out of the reach of
children and do not allow persons Unfamil-
iar with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
• Maintain power tools. Check for misalign-
ment or binding of moving parts, breakage of
parts and any other condition that may affect
the power tool's operation. If damaged, have
the power tool repaired before use, Many acci-
dents are caused by poorly maintained power
tools.
• Use the power tool, accessories and tool
bits etc., in accordance with these instruc-
tions and in the manner intended for the
particular type of power tool, taking into ac-
count the working conditions and the work
to be performed. Use of the power tool for
operations different from intended could result
in a hazardous situation.
Service
• Have your power tool serviced by a quali-
fied repair personnel using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.

Additional safety rules for blower vacs

• Always wear adequate protective clothing
when operating the tool to avoid injuries to
face, eyes, hands, feet, head or hearing ,Use
safety glasses or a face shield, high boots or
sturdy shoes, long trousers, work gloves, a
hard hat and ear defenders.
• Do not start the tool when it is upside down or
when it is not in the operating position
• Switch the motor off and remove the plug when
the tool is not being used, left unattended, be-
ing cleaned, being moved from one place to
another or when the extension cord is entan-
gled or damaged.
• Do not operate the tool near people, especially
children or pets. Turn it off if they get too close.
Maintain a safe distance of at least 5m from
other people when using the tool.
• Never direct the blower tube towards bystand-
ers or pets. Never blow debris in the direction
of bystanders or pets. The operator is respon-
sible for accidents or hazards occurring to
other people or their property.
• Do not handle the plug or the tool with wet
hands and do not use the tool in the rain.
• Use only outdoor rated extension leads that
are so marked. Keep the extension cord away
from heat, oil and sharp edges.
• Ensure that the extension lead is secured in
a manner that prevents it form disconnecting
from the plug whilst in use.
• Keep all the air intakes and the blower tube
free of dust, lint, hair and other material that
may cause a reduction in air flow.
• Keep a balanced and stable stance while using
the tool.
• Do not switch on the tool in enclosed or poorly
ventilated spaces or in the presence of inflam-
mable and /or explosive substance such as
liquids, gases and powders.
• Do not get distracted and always concentrate
on what you are doing. Use common sense.
Never operate the tool when you are tired,
sick or under the influence of alcohol or other
drugs.
• Do not operate this appliance with long loose
hair or loose fitting jewellery. Tie long loose hair
back and remove loose fitting jewellery.
• Do not allow the blower vac to pick up any
burning or smoldering materials like ashes,
cigarette butts etc.
• Do not attempt to pick up breakable objects
like glass, plastics,china etc.
• Do not use in vacuum operation without the
collection bag fitted
• Do not use the blower vac in either the vacuum
or the blower position on gravel surfaces.
• Only operate the tool during broad daylight or
with adequate artificial light.
• When the tool is not in use, store it in a dry
place and out of reach of children.
• After use, disconnect the tool from the power
supply and check for damage. If you have the
slightest doubts, contract an authorized service
GB-4