Troubleshooting; Safety Instructions - Hama 00042540 Bedienungsanleitung

Installation
1. Use standard HDMI cables to connect HDMI output port of your video source to HDMI Switcher
H-210 HDMI input port. Make sure all HDMI sources and the display are turned off before connecting
the cables.
2. Connect HDMI input port of your display (e.g. monitor, LCD) to HDMI Switcher H-210 HDMI output
port.
3. Plug 9V power supply into the HDMI Switcher H-210 power input port.
4. Turn on the display.
5. Turn on video sources.
6. Use remote control or select button on frontside of HDMI Switcher H-210 to change input source.The
yellow LED on the received input glows. Also all green LED´s glow, whose inputs are receiving input
signals.

Troubleshooting

Problem
HDMI Switcher H-210 will
not operate:
No picture or Signal or poor
picture.
Remote control unit will not
operate.

Safety Instructions

1. Keep appliance away from dirt and moisture and avoid overheating. Only use in dry rooms.
2. Do not open up appliance. If appliance becomes damaged, discontinue use.
Only allow specialists to repair device.
3. Only use dry, soft cloths for cleaning purposes.
4. Caution: Do not let children handle this or any other electrical appliance.
5. Keep away from direct sunlight, radiators and vibrations. Protect from dust.
6. If not intending to use appliance for a long period, disconnect from mains.
7. 220 ± 240V AC / 50 Hz
Solution
- make sure the 9V power supply unit is plugged
in the HDMI Switcher H-210. Check to see if the
light is on.
- make sure your video display is HDCP compatible
- if you are using HDMI copper cable, overall
length of cable should not exceed 5 m.
- make sure all HDMI connectors are tightly
secured to all HDMI ports.
- turn off all equipments and restart all equipments.
- make sure the battery is in the remote control.