Useful Information; Operating - Medisana RC 410 Gebrauchsanweisung

Thank you
Thank you for your confidence and congratulations!
In purchasing the Massage Chair RC 410 you have
acquired a quality product of MEDISANA. In order to
achieve desired success and long-lasting pleasure with
your MEDISANA Massage Chair RC 410 we recom-
mend that you carefully read the following tips
for use and maintenance.
Please check first of all that the device is complete and
2.1
is not damaged in any way. In case of doubt, do not use
Items
it and contact your supplier or your service centre.
supplied
and packa-
The following parts are included:
ging
• 1 MEDISANA Massage Chair RC 410
• 1 Power supply unit
• 1 Assembly manual
• 1 Instruction manual
The packaging can be reused or recycled. Please dis-
pose properly of any packaging material no longer re-
quired. If you notice any transport damage during unpa-
cking, please contact your supplier without delay.
WARNING
Please ensure that the polythene packing is kept
away from he reach of children!
Risk of suffocation!

3 Operating

The Massage Chair features two functions:
Fingertip massage (Shiatsu massage) and warming. The warming function
can only be used together with the shiatsu massage function in the back
area. Do not use the unit for more than 15 minutes at a time. After approx.
15 minutes, the unit will switch off automatically. Always allow the unit to cool
down fully before you use it again.
1. Connect the massage chair to the power supply unit and insert the plug
into the mains socket. Ensure that the power supply is easily accessible.
2. Take a seat on the shiatsu massage seating area
self with the functions.
3. Press the On/Off button to switch on the device.
e
Switching off the device
Press the On/Off button . The power LED begins to flash and the
e
massage heads travel back up to the park position. When this position is
reached, the LED extinguishes.
If the devide is disconnected from power during operation,
the massage heads will diretly move to park position after
reconnecting power.
3.1 Functions
Demo-Taste
8
Press the DEMO button, the device starts automatically with
introduction of different back setting with different functions. The
LEDs show the current massage regions and functions. The device will
stop once all functions worked. (3 minutes).
Heat-Taste
9
Press the heat button to activate the function; the LED on
the control unit and the massage heads light up red. The heat is radiated
through the massage heads . Press button again to deactivate the
heat function; the LED and the red light of the massage heads go out.
2 Useful Information / 3 Operating
and familiarise your-
7
GB
8