Operation - auna 10030826 Bedienungsanleitung

• Plug the power cord into an electrical outlet. The time will flash on the display automatically. and the
clock indicator will be displayed.
• Press CLOCK.
• Use the + (UP) and - (DOWN) buttons to set the time.
• Press CLOCK to confirm (else, the unit will auto confirm after it flashes 5 times - the clock icon will
dissapear then).
• Press ALARM to switch to alarm mode. The Alarm bell icon will be displayed.
• Use the + (UP) and - (DOWN) buttons to set the alarm time.
• Press ALARM to confirm (else, the unit will auto confirm after it flashes 5 times).
• Set the SELECTION SWITCH to select radio, music 1, or music 2 as wake up music source.
• When the alarm rings, the light will light up .
• Press ALARM to cancel the alarm. Or press SNOOZE, to just pause the alarm for a few minutes.
The wake up volume is the volume you set it to, before switching the device off. The brightness of the
light will gradually brighten, when approaching the alarm time.
• Press the FM button switch to FM radio. The radio icon will be displayed.
• Press or
• Use VOL+/VOL- to adjust to your desired volume level.
• Press the FM button to turn off the radio. Next time switching the radio on, the station last listened to
will be tuned in automatically.
Press the DIMMER button repeatedly to adjust the LED display brightness in 4 levels.
• Press + (UP) or - (DOWN) to select the level of the brightness of the light.
• Press the LIGHT button to enter light mode. Press the LIGHT button again to exit the light mode. The
indicator will disappear.
• Press and hold the ALARM button to test the light level, The TEST indicator will flash. Press and hold
ALARM again to exit the test.
8

Operation

Setting the Time
Setting the Alarm
to adjust the FM frequency. Press and hold for auto search.
Radio
Dimmer
Light mode
www.auna.de