Parameter Setting; Adjusting The Wattage In Tc/Tcr Mode - SC iKuu i200 Bedienungsanleitung

54

Parameter Setting

The Parameters include W (wattage), V (current voltage), A (current amp), P (total puffs) and S (total vaping time in seconds)�
1� In VW mode (Power), press the fire button three times and then press the „Down" button� If the currently displayed
parameter is flashing, press the „Up" button to toggle between the parameters V, A, P and S�
2� If you are in TC / TCR mode and the current parameter displayed on the screen is W, press the fire button three times�
Then press the „Down" button twice so that the W parameter flashes� Press the „Down" button again so that parameter A
flashes� By pressing the „Up" button, you can now navigate to the parameters P, S and back to W�
Resistance Locking
In TC / TCR mode, press the fire button three times, then press the „Down" button three times� The resistance value
of the atomizer head you are using will be displayed� You can lock and unlock the value by pressing the „Up" key�
Note
Please make sure the atomizer head has room temperature when locking it�

Adjusting the Wattage in TC/TCR Mode

In the TC and TCR modes, the output power is between 1 W and 200 W� Press the fire button three times in quick
succession to enter the menu� Then press the „Down" button so that the mode in the first line flashes� Press the „Ab"
button again so that W flashes and press the "Up" or "Down" button to set the desired wattage value�
SC iKuu i200 – Selection & Operation of the Modes