Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Charging socket
Charging by the remote controller
Open the charger cover on the remote controller and take out the charging cable. Insert the charging plug into the charging
socket on the vehicle.
Charging by the USB cable
Insert the USB plug into the USB port on your computer. The charging LED lights up. Insert the charging plug into the charging
socket on the vehicle. The charging LED will extinguish to indicate the charging is in process. The LED will light up again after
approximately 1 hour to indicate the vehicle has been completely charged.
Operation
1. Move the ON/OFF switch on the vehicle and on the controller to ON. The LED on the controller will light up.
2. The trimmer is used to adjust the vehicle´s straight-line stability.
3. The remote controller has 5 gears. Press the left gearshift to shift up (speed: 0 – 30 km/h). Press the right gearshift to shift
down and reduce speed.
Power LED
Left gearshift (shift up)
Trimmer
Forward/back-
ward button
ON/OFF
switch
5 gear mode (red LED off)
Standard mode (red LED on)
Charging plug
Antenna
Charging LED
Right gearshift (shift down)
Turn left/right
ON/OFF switch
Backwards fine tuning
Forwards fine tuning
6
Stunt Show
Jumps with the vehicle
Flight direction and flight distance depend on the shape of the platform.
Stunt 1:
Drive onto the platform with maximum acceleration and velocity. Then press the left gearshift (shift up) and the vehicle will
fly upwards.
Stunt 2:
Drive onto the platform with maximum acceleration and velocity. Then set the forward button to zero position and the vehicle
will fly downwards.
button
Let your imagination flow and create your own stunts.
You need some experience and practice to accomplish your stunts. Learn to control
the vehicle and perform wild jumps. Always go full throttle at landing of your vehicle.
Platform
Platform
Platform
7
Werbung
