Werbung
Verfügbare Sprachen
Verfügbare Sprachen
User manual / Bedienungsanleitung
Stroboscope Testrecord
1.
Please put the
2.
To adjust the optimal speed for the turntable with the
about 1,97 – 3,94 inch (5 – 10 cm) over the
ca. 5-10 cm
Pic. 1: Distance between
3.
When the black lines stop in the blue light and do not move visible, you have the optimal
speed. (33 1/3 rpm outside stribe, 45 rpm inside stribe) (picture 1)
- If the lines move around clockwise, the drive is too fast.
- When the lines clearly move anticlockwise, the drive is too slowly.
4.
For the optimal speed adjustment we recommend our Smart Syncro (Art.Nr. EL024), so
you can exactly adjust the speed on the Hz.
5.
If the intensity of the light reduces, please change the battery.
Use the exact battery type: V23GA – 12 V - Alkaline
Speed Light
Open the
:
If the battery is flat, please open the
You can easily push it in and turn it (picture 2).
Take care about the polarity of the battery when changing (picture 3).
2
- Usage of the
Speed Light
Stroboscope Testrecord
and
- Attention -
Speed Light
The blue LED is not a laser diode!
Do not look directly in the light!
Speed Light
-
on your turntable.
Speed Light
Stroboscope Testrecord
with a thin screwdriver.
© clearaudio electronic GmbH, 2017/11
Speed Light
, hold the
(picture 1).
Werbung
