Cleaning And Maintenance - Afk HM-250T.6 Bedienungsanleitung

- the kneading hook which is equipped with a collar will only
fit in the largest opening. The beaters will fit in both openings.
- make sure the tabs on the beaters/dough hooks fit well into
the recesses of the round openings. Press each beater/dough
hook in un�l it clicks into place.
• Put the ingredients into a bowl.
• Insert the plug into the mains power socket.
• Keep the beaters/dough hooks in the ingredients.
• Switch the appliance on by se�ng the speed regulator to
posi�on 1.
• You can increase the speed by se�ng the speed regulator to
a higher posi�on or by pressing the turbo bu�on.
• Switch the appliance off by se�ng the speed regulator to
posi�on 0.
• A�er use, remove the plug from the wall socket.
• Press the EJECT bu�on to remove the beaters/dough hooks
from the appliance.
• Clean the beaters/dough hooks and the motor unit
(see 'Cleaning and maintenance').
NOTE
• Never insert anything into the ven�la�on openings. Make
sure they are unobstructed.
• If you are not using the appliance, switch it off and place it
on its flat side. The beaters or dough hooks will then be
poin�ng straight ahead.

CLEANING AND MAINTENANCE

Warning
Before cleaning the appliance, always switch it off and remove
the beaters/dough hooks from it.
Cleaning
• Do not use aggressive cleaners, abrasives or a sharp object,