Structure And Function - GEHA Office X12 CD Anleitung

- Ensure that the correct voltage is used.
- Never use several extension cords.
- In case the device displays any unusual characteristics (e.g. strange smell or smoke),
immediately stop operating the device and remove the mains power plug from the wall
socket.
sETTING UP ThE fILE shrEDDEr
1. The centre of gravity is located in the top part of the device. Make sure to position the file
shredder on an even surface to prevent it from toppling over.
2. Never operate the device near sources of heat or cold, or in an overheated, moist or dusty
environment.
3. Place the device close to a wall socket and ensure easy access to
the wall socket, in case the device needs to be deactivated.
4. Insert the inner waste receptacle (for CDs/DVDs) into the waste paper
container first (see image 1).
5. Make sure that the waste paper container is pushed all the way into
the device.
6. Connect the mains power plug to a regular 220-240 V AC wall socket.

sTrUcTUrE aND fUNcTIoN

1 LCD display
2 Button for forward operation/ time + (FWD)
3 Button for reversed operation/ time - (REV)
4 Button for setting the time
5 ON/ OFF - switch
6 CD/ credit card/ floppy disk slot (FD)
7 Paper feeder
8 Viewing window
9 Waste paper container
10 Rollers
commIssIoNING ThE fILE shrEDDEr
a. feeding Paper into the Device
The device can shred a maximum of 12 sheets (A4, 70 g/m²) simultaneously. Switch on the
file shredder by pressing the ON/OFF button on the rear of the device. The green LED 'Power'
Image 1
11