Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety Instructions
Keep the torchs out of the reach of children. The units are not toys and
do not belong in the hands of children.
Do not stare directly into the LEDs and do not direct the light beam
towards people or animals. The LEDs comply with LED Class 1 (EN
60825-1:1994+A1+A2).
Make sure that no liquids of any kind can enter the housing.
Do not expose the torchs to any extreme conditions like humidity, rain,
vibration, heat or prolonged direct sunlight.
Inserting the Batteries and Using
1. Turn the lamp head counter clockwise in order to unscrew. Insert the
batteries of the type LR6 (AA) into the battery compartment.
The large torch needs 3 batteries.
The middle torch needs 2 batteries and
the small torch needs 1 battery.
2. Please observe the polarity symbols in the battery compartment.
Tighten the lamp head.
3. To switch on the light, turn the lamp head slightly clockwise. To switch
off, slightly turn the lamp head counter clockwise.
Use the convenient wrist strap and key ring to carry the torchs with
your bunch of keys.
Cleaning
Clean the housing of the light only with a lightly moistened cloth. Do not
use aggressive chemicals or abrasives for cleaning.
Technical Data
Torch, large,
Torch, medium, 150 mm,
Torch, small,
Initial Setup and Operation
195 mm,
10 LEDs,
5 LEDs,
85 mm,
1 LED,
Batteries do not belong in household
garbage.
For battery disposal, please check with your
local council.
3 x LR6 (AA)
2 x LR6 (AA)
1 x LR6 (AA)
III
Werbung
