Intended Use; Getting Started And Operation; Package Contents; Safety Instructions - BASETech VK-9010A Bedienungsanleitung

Operating instructions
VK-9010A Window vacuum cleaner
Best.-Nr. 1432157

Intended use

The product serves for simultaneous removal and absorption of water from such smooth sur-
faces as window panes, mirrors and tiles.
It is not intended to vacuum up significant quantities of liquids from horizontal surfaces, such
as spilled drinks (max. 30 ml).
Furthermore, the product cannot be used for vacuuming dry dust and dirt.
Power is supplied via a permanently installed Li-ion rechargeable battery, which can be rechar-
ged via the provided power adapter.
For safety and approval reasons (CE), you may not convert and/or alter the product. If you
use the product for purposes other than those described above, the product may be damaged.
Furthermore, improper use may cause risks such as short-circuits, fire, etc. Please read the
operating instructions carefully and do not discard them. If you pass the product on to a third
party, please hand over these operating instructions as well.
This product complies with the applicable national and European regulations. All names of
companies and products are the trademarks of the respective owners. All rights reserved.

Package Contents

• Window vacuum cleaner
• Mains adapter
• Operating instructions
Latest operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code shown here. Follow the instructions on the website.

Safety instructions

Please read the operating instructions carefully and pay particular attention
to the safety instructions. We do not assume liability for injuries/material
damages resulting from failure to observe the safety instructions and the
information in these operating instructions regarding the proper handling of
the product. Furthermore, in such cases, the warranty/guarantee will be null
and void.
• The design of the wall power supply complies with IEC Protection Class II (double
insulated electrical appliances).
• The mains socket for the AC adapter should be close to the device and easily
accessible.
• Do not unplug the power adapter from the mains socket by pulling on the cable.
• Never touch a power adapter that shows signs of damage, as this could cause a
fatal electric shock!
Switch off the mains voltage to the mains socket to which the power adapter is
connected (e.g. switch off at the corresponding circuit breaker or remove the safety
fuse and then switch off the corresponding RCD). Only then unplug the power
adapter from the mains socket and take the product to a specialised workshop.
• The product is suitable only for dry, enclosed indoor areas. The product must not
get damp or wet, as this would destroy it. Furthermore, this could cause a lethal
electric shock!
• The product is rated to the IPX4 protection class. Thus, the product is protected
again spraying water on all sides. Never dip it under water.
• This product is only to be run in horizontal (switch on top) and vertical (vacuum
nozzle on top) positions. Otherwise, the product will be damaged.
• Please only use conventional detergents in conjunction with the product. Do not
use any cleaning foams, alcohol or other aggressive cleaning agents.
• The product is not a toy. Keep out of the reach of children and pets.
• Do not carelessly leave the packaging material lying around, since it could be-
come a dangerous plaything for children.
• If you are not going to use the product for a long time (e.g. putting it into storage),
recharge the battery every 3 months at the latest to prevent deep discharge. In
the event of a deep discharge, the built-in Li-ion rechargeable battery will be per-
manently damaged!
• Protect the product from extreme temperatures, direct sunlight, strong vibrations
and combustible gases, vapours and solvents.
• Never expose the product to mechanical stress.
• If safe operation is no longer possible, take the device out of service and secure
it against unintended use. Safe operation is no longer possible, if the product:
- has visible damage,
- no longer functions properly,
- has been stored under adverse ambient conditions for an extended period of
time or
- has been exposed to considerable strain during transport.
• Please handle the product carefully. The product can be damaged if crushed,
struck or dropped, even from a low height.
• If you have doubts about how the equipment should be operated or how to safely
connect it, consult a trained technician.
• Maintenance, adjustment and repair work may be carried out only by an expert or
a specialist workshop.
• If you have any questions that are not answered in these operating instructions,
please contact our technical customer service or another specialist.

Getting started and operation