SPEEDLINK BATTERY PACK Handbuch Seite 4

EN
1. Make sure, that the battery pack is fully charged,
before activation.
2. Connect the enclosed micro-USB charging cable
to the socket of the battery pack.
3. Connect the other plug (USB-A) to an appropiate power supply.
4. The switch at the back of the battery pack has
to be set to Off, while loading.
5. Disconnect the battery pack from the power supply,
once it is has fully charged.
6. Connect the battery pack to the charging plug of
your original PS4 controler.
7. Set the switch at the back of the battery pack to On,
if there is additional need of power.
8. Set the battery pack to Off, when your controller is
fully charged or the battery pack is fully discharged.