Haset 9035/6 Betriebsanleitung Seite 14

USA
• Any claims against the manufacturer and/or
its authorized agents because of damage
caused by improper use of the tool will be
void.
• Any personal injury or material losses
caused by improper use are the sole
responsibility of the operator and user.
4. Storage
The tool has be stored according to
the following conditions:
• Keep tool in a dry and dust-free place.
• Do not expose the tool to liquids or aggres-
sive substances.
• Do not store the tool outdoors.
• Keep the tool out of reach of children.
• Storage temperature: -10°C up to +40°C
• Relative air humidity: max. 60%
5. Dangers emanating
from the tool
Before each use, check the HAZET Air Tool for
full functional efficiency. Do not use the air tool
if its functional efficiency cannot be ensured or
if damage is detected. If the tool is used, when
it is not in full working order, you risk severe
injuries to persons and damage to property.
Defective tools may cause severe injury.
• Do not use tools whose on/off-switch is
defective. Tools that cannot be switched on
or off with their on/off switch are dangerous
and have to be repaired.
• Any service or repair work must be carried
out by qualified personnel only. In order to
guarantee long term operational safety, only
original spare parts of the manufacturer must
be used.
• Do not remove any safety devices and/or
housing parts.
• Do not operate the tool, if safety covers or
safety devices are missing or defective.
• For safety reasons any modification of
HAZET tools is strictly forbidden. Any modi-
fication of the tool will result in immediate
exlcusion from warranty and liability.
Always wear personal protective clothing and safety equipment!
14
For Your Safety
• Wear work gloves. During
load-operation vibrations are
transmitted to the user. It is
therefore absolutely neces-
sary to wear gloves.
• Wear
Pneumatic tools
chips, dust and other abra-
ded particles at high speed
what may result in severe eye
injuries. Compressed air is
dangerous. The air flow may
cause harm to sensitive parts of the body
like eyes, ears, etc. Dust and objects being
raised by the air flow may cause injuries.
• Use ear protection. Long
exhibition to the working
noise of pneumatic tools may
result in a permanent hearing
loss.
• Wear face or dust mask.
Breathing in the steam of
some materials like adhe-
sives and tar that contain
dangerous chemicals can
cause serious harms to the
lungs and respiratory tracts.
• Wear proper-fitting protec-
tive clothing. Tools with
moving parts can get caught
in the hair, clothing, jewellery
or other loose objects what
may result in severe injuries.
Never wear too large clothing
and/or clothing with bands or
loops which may get caught in the moving
parts of the tool. During the work, take off
jewellery, watches, identification tags, brace-
lets, necklaces etc. that could get caught in
the tool. Never touch the moving parts of a
tool. Long hair should be covered or tied
together.
• Keep children away from pneumatic
tools. Unattended tools or tools that are
connected to the compressed air supply
may be used by non-authorized persons and
could injure them or other persons.
eye protection.
can raise
GB