Dab Mode - Kruger&Matz KM0511 Bedienungsanleitung

Owner's manual

dAB MOdE

1. In dAB mode, press [SCAN/pLAY] button on the front panel, and the screen will
show "Scanning..." (automatic full-band search). After scanning, a found station
will be played.
2. press and hold
3. When in dAB mode, press INFO/MeNU button to display information of dAB,
e.g.: receiving signal strength, program type, frequency, transmission rate, etc.
Note: if the dAB signal is received, the device will automatically update the time and
date (if the function is enabled in settings).
dAB settings:
In dAB mode, press and hold the INFO/MeNU button to enter MeNU options. press
/ button to navigate through options and/or press SeLeCT button to enter
selected tab:
• Full scan: enter to perform automatic dAB stations scan
• Manual tune: enter to manually set dAB station frequency
• dRC: set dynamic Range Compression to off / high / low
• prune: select Yes or No
• System: as described in INFO/MeNU OpeRATION section
FM MOdE
Automatic search
When in FM mode, press SCAN/pLAY button on the front panel to perform automatic
station search. The screen shows "Scanning...". When a station is found, the search
is stopped and the station is played.
Manual search
When in FM mode, press and hold or press continuously
desired frequency.
When in FM mode, press INFO/MeNU button to display information of FM radio
station, e.g.: signal strength, program type, date, time, RdS.
FM stereo/single channel selection
Click the INFO/MeNU button, to check the radio information. When the screen
displays "Stereo" or "Mono", press SeLeCT button to change. press INFO/MeNU
button again to save and exit.
Note: Stereo mode is default. If the radio signal is weak it will be automatically
switched to Mono. To eliminate noise change the audio settings to "Forced mono".
FM settings:
In FM mode, press and hold the INFO/MeNU button to enter MeNU options. press
/ button to navigate through options and/or press SeLeCT button to enter
selected tab:
/ button to select next/previous station.
/ button to reach
25