Operating Audio Functions - EisSound KBSOUND iSELECT Benutzerhandbuch

3. Operating Audio Functions

If the electronic module is off, a brief press on the
Loudness: It reinforces the bass level in terms of the volume level, assuming a
greater backing at a lower volume and a lesser backing at a higher volume.
Mono/stereo reception: When activated, this feature allows the FM stations to be received in stereo.
Note: If the electronic module´s configuration is mono, the signal will always be received in mono
"IDEAL" mode of operation can be instantly accessed by pressing the IDEAL key on the remote
control. In this mode, a specific station is played at selected levels of volume, bass, treble and
To program your "IDEAL" mode of operation, select the desired levels of volume, bass, treble and
loudness, as well as the station frequency. Then press the IDEAL key for 2"
ON/OFF key
The LED will display the word "ON"
When the electronic module is off, the LED will be OFF.
Increase/decrease in the volume level: The LED will flash
to indicate the desired change in volume.
Increase/decrease in bass/treble levels: The LED will flash
to indicate the desired change in the bass/treble levels.
When deleted this feature only allows for mono reception.
even if the signal received by the antenna is in stereo.
will gradually turn on the unit
(between 1 and 2 seconds).
loudness.
Key Sequence Display
on
vol 58
BAS+06
LD on
STEREO
IDEAL
IDEAL
2''
5
ENG