Configuring Magictouch; Replacing The Fuse; Disposal; Technical Data - Waeco MagicTouch TFL100 Montage- Und Bedienungsanleitung

_tfl100.book Seite 13 Mittwoch, 5. Dezember 2007 3:27 15
MagicTouch TFL100
7

Configuring MagicTouch

Set the time period for the Coming Home function as follows (fig. 2, page 3):
– Using a screwdriver, turn the control (1) in the direction of "max." to set a time
period of up to 120 seconds.
– Turn the control towards "min." to reduce the time period.
– Turn the control towards "min." as far as it will go to switch off the
Coming Home function.
8

Replacing the fuse

Remove the defective fuse (fig. 2 2, page 3) and replace it with a new fuse that has
the same rating (15 A).
9 Warranty
The statutory warranty period applies. If the product is defective, please return it to the
manufacturer's branch in your country (see the back of the instruction manual for the ad-
dresses) or to your retailer. For repairs and warranty claims, you must submit the following
documents:
A copy of the receipt with purchasing date
A reason for the claim or description of the fault
10

Disposal

If possible, always dispose of the packaging material in the appropriate recycling
container.
If you wish to finally dispose of the device, ask your local recycling centre or spe-
cialist dealer for details about how to do this in accordance with the applicable
disposal regulations.
11

Technical data

Item no.:
Operating voltage:
Current consumption:
Fuse:
Operating temperature:
Dimensions (W x D x H) in mm
Certifications
Variations, technical improvements and delivery options reserved.
2221300001
12 V DC
max. 11 A
(depending on the vehicle's light circuitry)
15 A
–30 °C to +80 °C
94 x 87 x 38
E
Configuring MagicTouch
13