Sd/Usb Remote Control Operations; Bluetooth ® Remote Control Operations - A.N.T iRoller 10 Bedienungsanleitung

4.4.1 | SD/USB REMOTE CONTROL OPERATIONS

Direct the remote control towards you r device infrared interface.
Operating range is about 8 meters (26.2 ft).
1 PLAY/PAUSE
Press the PLAY/PAUSE button to start track playback. Pressing again this button,
the MP3 player switches to pause and playback is suspended.
2 EQ
You can recall seven different preset memories (Normal, Pop, Rock, Jazz, Classic,
Country, Low bass) by pressing the button repeatedly.
3 VOL-/VOL+
These buttons adjust MP3 player volume (from 0 up to 15).
Press VOL- to lower the volume, press VOL+ to increase the volume.
4 PREV/NEXT
Press briefly the PREV button to select the previous track, or press NEXT to select
the next track. Holding down either button you activate fast rewind or fast forward.
5 TRACK DIRECT SELECTION
Use the number keys 0 to 9 to directly select a track.
Example: If the track you wish to listen is #18, shortly press the button 1
first and then the button 8 (the display briefly shows "0018").
6 ENTER
Press the ENTER key to enter the menu to choose the equalizer, play mode
and the signal source.
EQ - Equalizer
To select one of seven preset equalizer press the ENTER key, then using the PREV
and NEXT keys search for "Eq", finally press the PLAY/PAUSE button to confirm.
Now you can activate one of the seven equalizer presets using the PREV and NEXT
keys and select the desired one with the PLAY/PAUSE button.
Play Mode – Playback mode
You can choose among six different playing modes: Normal/Random/Browse/All/
Repeat One/Repeat Folder. Press the ENTER key, then using the PREV and NEXT
keys, select "Play Mode" and confirm the selection with the PLAY PAUSE button. Now
press the PREV and NEXT keys to recall the six available play modes and choose
the one you want, by pressing the PLAY/PAUSE button.
Change Device – Source selection
MP3 player signal source selection:
1. Press the ENTER button and use the PREV and NEXT keys, search for
iROLLER 10
14 User manual |
"Change Device" and confirm the selection with the PLAY/PAUSE button.
Now using the PREV and NEXT buttons you can choose as signal source
between "SD Card", for the SD card or "UDISK", for the USB stick, confirm
your choice with the PLAY/PAUSE button.
2. Briefly pressing the button MODE the MP3 player changes the signal
source (SD/USB/Bluetooth ). The display shows the activated signal source.
®
Play Mode – Playback mode
1. To exit the menu, using the PREV and NEXT buttons search for "Exit"
and confirm the procedure by pressing the PLAY/PAUSE button.
2. Exit from the menu is automatic after 8 seconds and the display will
show the main screen.
7 MODE
1. Briefly pressing the MODE button, the MP3 player changes the signal
source (SD card/USB stick / Bluetooth
The display shows the currently activated signal source.
2. Press this key for about 2 seconds to turn ON/OFF the MP3 player.
You can turn off and turn on the MP3 player only by the infrared remote
control, not by the device itself.
NOTE: CHANNEL (CH-, CH+) and PICK SONG are disabled.
4.4.2 | Bluetooth REMOTE CONTROL OPERATIONS
®
1 PLAY/PAUSE
Press the PLAY/PAUSE button to start track playback. Pressing again this
button, the MP3 player switches to pause and playback is suspended.
2 VOL-/VOL+
These buttons adjust MP3 player volume (from 0 up to 15).
Press VOL- to lower the volume, press VOL+ to increase the volume.
3 PREV/NEXT
Press briefly the PREV button to select the previous track, or press NEXT
to select the next track. Holding down either button you activate fast
rewind or fast forward.
4 ENTER
Press the ENTER key to enter the menu to choose the Bluetooth
Operation and settings are described in the chapter "Bluetooth
).
®
menu.
®
MENU".
®
iROLLER 10
| User manual
15