Monacor HDMS-1042 Anleitung Seite 2

HDMI TM signal splitter
Please read these operating instructions carefully
prior to operation and keep them for later reference.
1 Operating Elements
1 LED "Power"
2 LEDs "Output": the respective LED lights up when
a reproducer is connected to the corresponding
output (6) and switched on
3 On / off switch
4 Connection "DC/5 V" for the supplied power supply
unit
5 Signal input jack "Input" for connection of a player
with HDMI TM
6 Signal output jacks "Output" for connection of up to
four reproducers with HDMI TM
2 Safety Notes
The units (HDMI TM signal splitter and power supply
unit) correspond to all required directives of the EU
and are therefore marked with
It is essential to observe the following items:
G
The units are suitable for indoor use only. Protect
them against dripping water and splash water, high
air humidity, and heat (admissible ambient temper-
ature range 0 – 40 °C).
G
Do not place any vessels filled with liquid, e. g.
drinking glasses, on the units.
G
Do not set the splitter into operation, or immediately
disconnect the power supply unit from the mains
socket if
1. there is visible damage to the power supply unit
or to the splitter,
HDMS-1042
.
Order No. 06.7880