Inline 60603I Kurzanleitung Seite 3

www.inline-info.com
QUICK INSTALLATION GUIDE
USB KM-SWITCH
Thank you for purchasing our 2-Port Border KM Switch!
With our highly reliable and quality product, user can enjoy
countless benefits from using this keyboard mouse switch.
Note: KM refers to Keyboard Mouse.
INTRODUCTION:
The 60603I is a 2-port keyboard mouse switch that features
our latest Border Switch and True Transparent USB (TTU)
Emulation Technology. The Border Switch Technology all-
ows mouse slide over seamlessly between two distinct PC
monitors. Thus two distinct desktops can combine into
one virtual extended desktop. The TTU Technology can
ensure ultimate compatibility to all types of keyboards and
mice, giving users a best experience in seamless keyboard
mouse switching.
Besides 60603I supports both PC and Mac systems.
Note: Only Tablet PC with Windows OS is compatible.
INSTALLATION:
Take the KM Switch out of the box and begin installation.
1. Connect the shared USB keyboard and mouse to the
KM switch.
2. Connect two computers which are going to share the
keyboard and mouse to the KM switch with USB cables.
Note: Since USB interface is hot-pluggable, you don't
have to turn off the computer before making connec-
tions to the KM switch.
Install KM switch driver to these two computers: for both
3.
Windows and Mac systems, just insert the companion CD
into your CD drive, and the autorun screen will pop up.
Follow the instruction to complete the installation. When
the installation is done, you will see a KM switch icon (see
below samples) on the system tray of your desktop.
Windows Mac OS
No live connection detected
Current active PC channel is on port 1
Current active PC channel is on port 2
Note: For Mac system, if the KM switch does not work
after installation, please locate the KMSwitcher.app file in
application folder and double click on this file to start the
program.
Note: The Windows switch software is recommended for
use on Windows XP or later. The Mac switch software is
recommended for use on Mac OS 10.4.X or later.
4. Now your KM switch should be ready to work. Please
see below image as a sample of connection Illustration.
CONNECTION DIAGRAM:
Move your mouse across border to trigger a switch over
OPERATION:
There are two methods to control your KVM switch for com-
puter selection: using (1) mouse cursor or (2) keyboard hot-
keys.
1. MOUSE CURSOR
To effect an instant keyboard-mouse switching to the target
computer/tablet PC, you can simply move the cursor cros-
sing the screen border.
2. KEYBOARD HOTKEYS
For Keyboard Hotkeys, please refer to „Quick Reference
Sheet". Please note that each keystroke hotkey sequence
should be pressed within two seconds. Otherwise, the hot-
key sequence will not be validated.
Please Note: Hotkey switching is not supported on Mac
keyboards.