Operating Elements - HEIDENHAIN ND 1202T Installationsanleitung

ND 1202T TOOL-CHEK
Installation Instructions
Operating Instructions available at www.heidenhain.de
Connecting a USB cable
This product provides a USB connection for printer and data storage device
communication. For more information on USB communications, refer to the
ND 1202T TOOL -CHEK Operating Instructions.
To connect a USB printer or data storage device:
Verify that the power switch is in the off position.
X X
Insert a printer USB (type A) cable or a USB data storage device into the products USB
X X
port.
Connecting a foot switch or remote keypad
This product provides an RJ-45 foot switch/remote keypad connection for use with a
HEIDENHAIN foot switch (ID 681041-01) or HEIDENHAIN remote keypad (ID 681043-01).
To connect an RJ-45 foot switch/remote keypad cable:
Verify that the power switch is in the off position.
X X
With the cable connector locking tab aligned with the connector, insert the cable
X X
connector into the interface connector until the tab locks into place.

7. Operating elements

Front
LCD screen
A
Soft keys: Change to support
B
functions
Feature selection keys: Initiate
C
measurement of features
X axis key: Zero and freeze X axes
D
Zero axis key: Initiates zeroing an
E
axis or axes
Z axis key: Zero and freeze Z axes
F
Menu key: Displays user menus
G
16
Front (cont)
Arrow cursor keys: Menu
H
navigation
Wide keys: Programmable for
I
frequently used functions
Send key: Transmit measurement
J
data to PC, USB printer or USB drive
Mode keys: Select diameter/
K
radius, absolute/incremental, unit of
measure or help
Numeric keypad: Enter numeric
L
data
M Command keys: Control
measurement
LCD on/off key: Turn LCD on or off
N
or delete features from the feature
list.
11
USB connector
12
Foot switch/remote keypad
connector