Viessmann 9140 Bedienungsanleitung Seite 4

2. Introduction
This lamp produces by SMD-LED the light which is suitable
to the lamp model. Low heat build-up and power input. Nearly
unlimited lifetime of the LED, so no more change is required.
3. Mounting
Caution:
Resistor and diode at the cables are needed for proper
function of the lamp. Never cut them off!
Never cover resistor or diode with insulation material,
because they have to be cooled by surrounding air!
- Remove the lamp carefully from the package.
- Check function before mounting.
- Drill a hole (Ø 5,5 mm) at the mounting place (see fig. 1).
- Put the cables from outside through the hole and push
the socket into the hole. If necessary, fix the lamp with the
fixation ring from inside (optional).
4. Connection
Connect the LED-lamp to the lighting power output of a model
railroad transformer (e. g. item-No. 5200) or power supply as
shown in fig. 3 and/or 4.
DC voltage: Connect the diode (red part with black mark)
with the plus pole of the power supply.
AC voltage: Operation with AC voltage could cause some
flickering. We recommend to use the Viessmann power modu-
le item-No. 5215 (fig. 4) which is sufficient for approx.
100 LED-lamps or reflectors. Connect the cable to the diode
with the brown output socket (fig. 3).
5. Technical data
Operating voltage: 10-16 V AC ~ (with and without 5215
Operating current: approx. 10 mA
Warranty
Each model is tested to its full functionality prior to delivery.
The warranty period is 2 years starting from the date of pur-
chase. Please contact Viessmann directly should a fault occur
during this period. If we find a material or production fault to be
the cause of the failure we will repair the model free of charge.
Expressively excluded from any warranty claims and liability
are damages of the model and consequential damages due
to inappropriate handling, disregarding the instructions of this
manual, inappropriate use of the model, overloading, inadmis-
sible high change-of-direction impulse of analogue AC control
equipment, faulty wiring of your model train layout, unauthor-
ized disassembling, construction modifications and use of
force, overheating, exposure to humidity and similar.
If you cannot find the cause of the fault please contact our
service department (service@viessmann-modell.com).
If needed send the model to the Viessmann service depart-
ment for checking and repair.
Adress see below.
Notizen
Die aktuelle Version der Anleitung finden Sie auf der
Viessmann-Homepage unter der Artikelnummer.
The latest version of the manual can be looked up at
the Viessmann homepage entering the item-No.
4
power module),
14-24 V DC =,
13-24 V digital signal
Viessmann
Modellspielwaren GmbH
Am Bahnhof 1
D - 35116 Hatzfeld-Reddighausen
www.viessmann-modell.de
Notes
92890
Stand 05/sw
05/2015
Ch/Me