Mounting; Adhesive Strip Mounting - Intofloor BASIC IP Montage- Und Bedienungsanleitung

Start-up
5.2

Mounting

Please read this entire section before starting to
mount the device.
You can use the supplied clip-on frame (A) to mount
the wall thermostat or easily integrate it into an existing
switch (see „5.2.4 Installation in multiple combinations"
on page 64).
If you want to mount the wall thermostat with the
supplied clip-on frame, you can use
• the supplied double-sided adhesive strips or
• the supplied screws
to fix it to a wall.
You can also mount the wall thermostat on a flush-
mounting box.
5.2.1

Adhesive strip mounting

For mounting the assembled wall thermostat with the
adhesive strips, please proceed as follows:
• Choose a site for installation.
Make sure that the mounting surface is smooth,
solid, non-disturbed, free of dust, grease and
solvents and not too cold to ensure long-time
adherence.
60