Illuminated display
Red charging
Blue Bluetooth
Green GPS
light
status
status
Off
5
On
Blinking
Fast
blinking
Installation and Bluetooth mode
Position the GNS 5870 MFI so that it has an unobstructed
view of the sky. Secure the receiver to avoid slipping.
Switch on the GNS 5870 MFI.
Activate the Bluetooth mode in your Apple device / PDA
/ PC and initiate a search for the GNS 5870 MFI with your
Apple device or other PDA / PC Bluetooth manager. This is
described in the manual for your device. When asked for
the PIN to establish the link, enter 0000.
Start your navigation software and select the appropriate
interface under the GPS settings if it is required.