Manual
Article No.: 843269
5.
System Setting
You can use the Kapego Dimmer 4 as "Slave" or "Master" DMX Dimmer.
8. Fundamental information
To derive the heat, we recommend the installation to allow sufficient space for the air to circulate
and the driver will not be overheated. Make sure that all connections are tight. The signal line
should be as far away from the power line (230V).
Menu
System-Einstellungen
Master [x]
Mode "Off"
You can use Kapego Dimmer 4 as an normal DMX
driver.
Mode "ON"
you can use the kapego Dimmer 4 asa stand-alone
DMX Master Controller, he will send DMX signal to
the next DMX dimmer.
Reset [x]
You can change all settings back to the basic settings.
Importer
Auf der Hub 2
D-76307 Karlsbad
Tel.: +49 7248 / 92 71 500
Fax: +49 7248 / 92 71 550
8
Web: www.deko-light.com
Mail: deko@deko-light.com