Herunterladen Diese Seite drucken

Werbung

VN710 HY-i40

Werbung

loading

Inhaltszusammenfassung für Vision VN710

  • Seite 1 VN710 HY-i40...
  • Seite 2: Remote Control

    SCOPE OF DELIVERY / Lieferumfang ITEM FIGURE SLOT QUANTITY Artikel Abbildung Steckplatz Anzahl Main Device – Hauptgerät STYLUS – Markierstift MicRO SD caRD 8GB inKL: naviGaTiOn SOFTWaRe – MicroSD Speicherkarte 8GB Navigationssoftware ReMOTe cOnTROL – Fernbedienung viDeO inPUT caBLe SeT Video-Eingang Kabelsatz ReaR caM inPUT Rückfahrkamera-Eingang...
  • Seite 3 SCOPE OF DELIVERY / Lieferumfang ITEM FIGURE SLOT QUANTITY Artikel Abbildung Steckplatz Anzahl aUDiO OUT (SUBWOOFeR/cenTeR) Audio-Ausgang (Subwoofer/Center) USB caBLe SeT WiTH 1 cOnnecTOR USB Kabelsatz mit 1 Anschluß iPOD / iPHOne cOnnecTOR iPod / iPhone Anschluss BT-MicROPHOne BT-Mikrofon GPS anTenna GPS Antenne HanDBRaKe cOnnecTiOn Handbremsen-Anschluss...
  • Seite 4 CONNECTION DIAGRAM / Anschlussdiagramm BT-MicROPHOne BT-Mikrofon aUDiO OUT (DUaL ZOne) Audio-Ausgang (Dual Zone) aUDiO OUT (SUBWOOFeR/cenTeR) Audio-Ausgang (Subwoofer/Center) viDeO inPUT caBLe SeT Video-Eingang Kabelsatz FROnT caM inPUT (optional) Frontkamera-Eingang (optional) SPeciFic cOnnecTORS OF THe veHicLe Fahrzeugspezifische Stecker WiTHOUT FUncTiOn aM/FM anTenna Ohne Funktion AM/FM Antenne GPS anTenna...
  • Seite 5 INSTALLATION NOTES / Installationshinweise Important Notes prior to installation: This guide is an installation aid for a proper installation of the device. Please read the following instructions prior installation: 1.) Please treat all parts of the sound system and the components of your vehicle with caution. 2.) Follow under all circumstance the regulations of the vehicle manufacturer and do not make any modifications on the vehicle, which could interfere the driving safety.
  • Seite 6 INSTALLATION NOTES / Installationshinweise Transportation lock: Remove both transportation locks on top of the device before you start the installation. Transportsicherung: Entfernen Sie beide Transportsicherungen auf der Oberseite des Geräts, bevor Sie mit der Installation beginnen. GPS antenna: The GPS (13) antenna must be mounted horizontally in front on the dashboard (ensure a clear view to the sky).
  • Seite 7 INSTALLATION NOTES / Installationshinweise Handbrake connection: connect the cable from the handbrake connection (14) with the handbrake signal in your vehicle. The signal must be connected with ground while the handbrake is applied. Please contact for a proper and safe installation your car dealer! according to legal regulations, the device must playback a DvD or video on the main screen only with the handbrake applied, never connect the the cable permanently with the vehicle‘s ground.
  • Seite 8 INSTALLATION EXAMPLE / Einbaubeispiel 1.) Loosen at first the lower decoration panel with a mounting wedge and put the panel aside. Then remove the 3 marked screws. 1.) Lockern und entfernen Sie zunächst vorsichtig die untere lange Blende mit einem Montagekeil und legen Sie die Blende beiseite. Entfernen Sie dann die 3 markierten Schrauben.
  • Seite 9 INSTALLATION EXAMPLE / Einbaubeispiel 5.) Then mount the lower original controller unit as well as the new eSX device into the bay to the location where before the original radio was. ensure that alle cable connectors of both units are connected. 5.) Montieren Sie nun die untere Steuereinheit und ebenso das neue ESX Gerät, an die Stelle im Schacht wo zuvor die originale Radioeinheit eingebaut war.
  • Seite 10: Notes / Notizen

    NOTES / Notizen...
  • Seite 11 NOTES / Notizen...
  • Seite 12 eSX car Media Systems · audio Design GmbH am Breilingsweg 3 · D-76709 Kronau/Germany Tel. +49(0)7253 - 9465-0 · Fax +49(0)7253 - 946510 www.esxaudio.de - www.audiodesign.de ©2013 all Rights Reserved...

Diese Anleitung auch für:

Hy-i40