Before Use; Setting The Speed - Braun Multiquick 5 Vario 4191 Bedienungsanleitung

English
Our products are engineered to meet the highest
standards of quality, functionality and design.
We hope you thoroughly enjoy your new Braun
appliance.

Before use

Please read the use instructions carefully and
completely before using the appliance.
Caution
• This appliance shall not be used by
children. Keep the appliance and its
cord out of reach of children. Switch
off the appliance and disconnect
from supply before changing acces-
sories or approaching parts that
move in use.
• This appliance can be used by
persons with reduced physical,
sensory or mental capabilities or lack
of experience and knowledge if they
have been given supervision or
instruction concerning use of the
appliance in a safe way and if they
understand the hazards involved.
•
The blades are very sharp! To
avoid injuries, please handle
them with utmost care.
• Always disconnect the appliance
from the supply if it is left unattended
and before assembling, disassem-
bling or cleaning.
• Do not hold the motor part (4) nor the
whisk gear box (8a) under running
water, nor immerse them in water.
• The lids (11a, 12a) can be cleaned
under running water, but do not
immerse it in water, nor clean it in a
dishwasher.
• Braun electric appliances meet
applicable safety standards. Repairs
or the replacement of the mains cord
must only be done by authorized
service personnel. Faulty, unqualified
repair work may cause considerable
hazards to the user.
5722111294_MQ5135_Korea_S6-16.indd 9 5722111294_MQ5135_Korea_S6-16.indd 9
• Before plugging into a socket, check
whether your voltage corresponds to
the voltage indicated on the appliance.
• This appliance is designed for house-
hold use only and for processing
normal household quantities.
• The beaker (9) and the bowls are not
microwaveproof.
• Be careful if hot liquid is poured into
the food processor or blender as it
can be ejected out of the appliance
due to a sudden steaming.
Description
1 Variable speed regulator
2 Variable speed button (on/off)
3 Turbo button
4 Motor part
5 Release buttons
6+7 Blender shaft
8a Whisk gearbox
8b Whisk
9 Beaker
10 350 ml chopper «hc»
10a Lid
10b Blade
10c Bowl
10d Anti-slip base / lid for storage
11 500 ml chopper «ca»
11a Lid
11b Blade
11c Bowl
11d Anti-slip base / lid for storage
12 1250 ml chopper «bc»
12a Lid
12b Blade
12c Ice blade
12d Bowl
12e Anti-slip base / lid for storage
Please clean all parts before using for the first time
(see paragraph «Cleaning» / fig. B).

Setting the speed

When activating the variable speed button (2), the
processing speed corresponds to the setting of the
variable speed regulator. The higher the setting, the
faster the chopping results. You can adjust the
speed conveniently during operation by turning the
speed regulator using your thumb or index finger.
Maximum processing speed is achieved by
pressing the turbo button (3). You may also use the
turbo button for instant powerful pulses without
having to manipulate the speed regulator.
9
06.10.14 12:20 06.10.14 12:20