Audio Pro LV2e Bedienungsanleitung Seite 13

HOW TO CHANGE ZONES ON LV2 SPEAKERS
TO CHANGE ONE OR MORE PAIRS OF SPEAKERS FROM ZONE A TO ZONE B:
1.
Change to differ-
ent House Code (for
example 2) on rear of
the speaker pairs you
want to allocate to new
Zone.
(All speaker pairs you
want in Zone A, keep in
House Code 1.)
VPut speakers to be changed to Zone C in different House Code from the others.
Do Zone changes as above and put back to same House Code as the other speakers.
Note:
1. Zone control features volume level, On/Off and mute. This without affecting speakers in other
Zone. With Master volume you adjust volume level on all zones at the same time.
2. Returning to default settings (Zone A, 50% volume):
Turn off LV2 speakers with remote. Turn on again and press MUTE while LED flashes. Push Mute
once more. Now speaker pair (or all speakers in same Zone) are in default setting.
ADDING RX100 WIRELESS RECEIVERS
TO THE LV2 AUDIO NETWORK
You can add the RX100 wireless receiver (sold separately) to an existing LV2 wireless system.
Add powered speakers, stereo receivers and powered subwoofers and have all units part of same
wireless audio network. You can add limitless number of RX100 within the range of transmitter.
2.
Change House Code on
the transmitter to same
as the speakers you are
changing to new Zone.
Turn off speakers with
the remote (aim at right
speaker on one of the
speaker pairs.)
All speakers set in this
(for example 2) House
Code will be turned off.
RX100 + powered
speakers
3.
Turn on same speakers
again using the remote.
While LED on speakers
flashes red and blue,
push Zone B volume +
button.
Now the speakers are
set to Zone B.
+
4.
Change all speakers
and transmitter back to
House Code 1.
Now you have Zone A
speakers (the speakers
you left in House Code
1) and Zone B on the
speakers you turned off
and on.
+
RX100 + powered
subwoofer