Inhaltsverzeichnis
Werbung
ABB-Welcome
Installation dimensions for slotted screw holes
1.
The bottom of the device has screw holes for fastening on the wall according to
the above dimension instructions.
2.
In addition, the bottom of the device can be fixed to the existing flush -mounted
box. The dimension of the compatible flush-mounted box is shown above.
Wiring
Fix the bottom of the device and connect it with reference to the graphics. The insulated
section of the cable end must not be longer than 10mm.
Settings
Set addresses of the preferred outdoor stations and the address of the indoor station on
the jumper (see chapter "
|
Adjusting the device
").
— 14 —
Werbung
Inhaltsverzeichnis
