04/2014
1010741-02
5.7
Instructions for replacing the lamps
The lamp effect decreases over the course of time. As such, the replacement
intervals specified in the maintenance plan must be adhered to.
5.7.1
Lamps
Replace faulty lamps immediately.
5.7.2
Makrolon tubes
Coloured makrolon tubes can be fitted on the accent lamps. The makrolon
tubes do not have to be changed, merely refitted with the new lamps.
5.7.3
Starter
Replace faulty starters immediately.
You can recognize a faulty starter by the blackened ends of the lamps or
when the lamps can no longer be started.
Operating a lamp with a faulty starter significantly shortens its service life. The
lamp loses power and may begin to flicker under certain circumstances.
The starters are located in either one of the two lamp sockets or are visible
when the lamps are removed.
Cleaning and maintenance
Operating instructions – 35/54