DigiSender DX2000-LCD Plug’n’Go LCD Handbuch Seite 11

DX2000-LCD - DigiSender® Plug'n'Go™ LCD - Single Input 5.8GHz Wireless AV Sender System
What do you see on the second TV?
I see a snowstorm or blue
Switch OFF your DigiSender® RECEIVER.
What do you now see on the second TV?
I now see a black screen...
NOT RECEIVING SIGNAL
1. Switch the DigiSender® Re-
ceiver back on.
2. Ensure the DigiSender®
Transmitter is switched on.
3. Try the other 3 available Au-
dio/Video channels ensuring
that the Audio/Video Channel
is set the same on both the
Transmitter and Receiver.
Please read the instructions carefully prior to installation
screen...
I still see a snowstorm or
blue screen...
WRONG TV CHANNEL
SELECTED
This indicates that the cor-
rect SCART Channel has NOT
been selected on the second
television. Look for buttons
on this televisions remote
control which could select the
AV Channel such as EXT, AV,
VIDEO, VCR, AUX, Channel 0
AND .
ENGLISH (UK)
Troubleshooting
Video Problems
I see lines over the picture...
INTERFERENCE
This indicates one or more
electrical devices are inter-
fering with the DigiSender®.
Make sure the Transmitter
and Receiver are not directly
on top of other electrical de-
vices. Try all 4 Audio/Video
Channels on your DigiSender®
as one or more may still be
available. Visit digisender.net
or contact our helpline for in-
formation on configuring your
equipment to work together.
Page 11