Hama MoveData Bedienungsanleitung Seite 4

6. Using via Lightning Connector
Note – microSD/ microSDHC/
microSDXC memory cards
• The inserted memory card has to be
formatted into FAT32 for an easy use.
• To transfer your data/files optimally the use of
memory cards from class 10 is recommended.
• Download the Hama MoveData App from the
Apple App Store.
• Plug your memory card into the appropriate slot
of the card reader.
• Press the unlocking device and push it into the
direction of the desired connector (Lightning).
• Connect the card reader with your terminal
device (iPhone/iPad/iPod) via the lightning
connector.
• Open the MoveData App.
There are several options for using the card reader
in the main menu.
Contact Backup
• Backup of the contact information from the
terminal device to the memory card
• Recovery of the contact information from the
memory card to a terminal device
Local Storage
• Memory capacity for files directly in the Hama
MoveData App
• Advantage: direct access to the stored data,
even without card reader
6
External Storage
• Direct access to the files stored on the memory
card (only when using the card reader)
Photo Album
• Direct access to the files (images and videos) on
the terminal device
Settings
• Access to the settings section of the Hama
MoveData App
Note – App Authorization
• For some functions, the Hama MoveData
App needs the permission for access to your
terminal device (e.g. contact information
backup / recovery, back up images, etc.)
• If the app should have no permission,
you get an appropriate notification while
performing such a function.
• To permit the access, select the Hama
MoveData App in the settings menu of the
terminal device and push the appropriate
switch to green.
Note – Icon
This icon is used when you have to
touch the display on a certain spot to
perform an action or open a menu.