Care And Cleaning - Soba DM22 Gebrauchsanleitung

DRINK-MIXER DM22
OPERATING YOUR DRINK-MIXER
1. Remove all promotional labels from the
drink-mixer. Wash the jug in hot soapy
water and dry thoroughly. Clean the
mixing blade and shaft with a damp cloth
and dry thoroughly.
2. Place the drink-mixer on a level, dry
surface. Plug the unit into an electrical
outlet.
3. Ensure the 2 speed switch is in the "off"
(0) position (fig 1).
4. Combine ingredients in the supplied jug.
Do not fill the jug beyond the "max" fill
marking (fig 2).
5. Holding the jug and place it into the
drink-mixer. Ensuring the top of the jug is
located behind the top support (fig 3). The
base of the jug should be rested on the
bottom bracket (fig 4). The interlocking
nodules on the base of the jug fit into the
bottom bracket to ensure the stability of
the jug.
6. Switch on at the drink-mixer.
7. To process the ingredients on speed 1,
press the switch to "I". To process on
speed 2, press the switch to "II" (fig 5 &
fig 6).
8. When the smoothie drink is mixed well, press the switch back to "O" (0ff position)
to stop the unit (fig 1).
9. Remove the jug by lifting it upwards slightly to release from bottom jug bracket,
and serve.

CARE AND CLEANING

1. To clean the blade, fill the jug with 1 cup of warm water. Operate the drink-mixer
as previously described, on speed 1, in operating instructions. Dry mixing blade
and shaft with a soft cloth.
2. Wipe the motor housing with a damp cloth. Ensure that the cloth is not excessively
wet and that no moisture enters the vents on the motor housing.
3. Wash jug in warm, soapy water. Washing in a dishwasher is not recommended.
3
INSTRUCTION MANUAL