ACE View is reset to the factory settings. Recordings are not deleted. CAUTION: This is only advisable if you want to reset the settings or ACE View is no longer functioning or is no longer recognised by your PC.
Change recording interval Change the value at RECORDING FILE LENGTH to 0, if you wish so that ACE View ends the playback after 5 minutes each time and starts a new video recording. 1 corresponds to 15 minutes, 2 corresponds to 30 minutes.
LED turns off. A normal charging process lasts approx. 1.5 - 2 hours. - Do not put ACE View on when driving in the night as it may impair your vision. - Protect the camera lens from too much sunlight or very strong artificial light.
Cambiar el intervalo de grabación Cambie este valor en RECORDING FILE LENGTH a 0 si desea que ACE View finalice la grabación cada cinco minutos e inicie una nueva grabación. 1 corresponde a 15 minutos y 2 a 30.
Sincronizar con Wi-Fi Para utilizar la Wi-Fi, necesita la app (véase arriba). Pulse el botón de Wi-Fi durante un segundo en la ACE View. Asegúrese de que la Wi-Fi esté conectada en su smartphone. Conecte el dispositivo con la red E7 (contraseña: 12345678).
- Se recomienda finalizar la carga unos 45 minutos después de que se apague el LED rojo. Una carga normal dura entre 1,5 y 2 horas. - No se ponga la ACE View mientras conduce por la noche, ya que su visión puede resultar perjudicada.
Modifier les propriétés de lecture et du système Reliez ACE View à votre PC via le câble micro SD. La carte micro SD doit se trouver à l'intérieur de l'appareil. Veuillez ouvrir le fichier SETTING.txt que vous trouverez sur la carte micro SD.