Maintenance - Kingswood KGCH60X IX Benutzerhandbuch

MAINTENANCE

GREASE FILTERS
Metal grease filters have an unlimited life and should be washed once a month either by hand or in a
dishwasher at a low temperature and with a short cycle. Washing in a dishwasher can cause grease filters to
turn white, but this in no way affects efficiency.
Pull out the handle to remove the filter.
Wash the filter and leave it to dry, proceeding in reverse order to refit it.
REPLACING THE HALOGEN BULBS
IMPORTANT: Replace using 20W max G4 halogen bulbs only.
1. Disconnect the hood from the mains power supply.
2. Use a small screwdriver to gently prise (at the three points indicated) the lamp cover off.
3. Remove the burnt-out lamp and fit a new one.
4. Replace the lamp cover so that it clicks into position.
CARBON FILTER
(filter hoods only)
Retains any unpleasant odours produced during cooking.
Fit a new carbon filter every 4 months
Fitting or replacing the carbon filter
1. Remove the grease filter (refer to the section "grease filters").
2. Place the carbon filter on the grease filter.
3. Clamp the carbon filter with the metal catches provided, to be inserted in the holes on the
frame.
4. Reinsert the grease filter complete with carbon filter.
Reverse the above procedure to refit the filter holder and grease filter.
- use safety gloves.
- disconnect the appliance from the mains power supply.
GB11