McVoice MK-209 RF color Bedienungsanleitung Seite 7

Installation of the Camera
• The bracket of the camera can be attached to the subsurface by screwing.
• Connect the camera with its power supply and the power supply with an electric outlet. Now the camera
is ready for operation.
• You can focus the camera by turning the lens.
• Adjust the transmitting channel with the switch [6] at the
backside of the camera.
1. Antenna
2. LED as channel indicators
3. Receiving channel switch
4. On-/Off-switch LOOP-function
5. Connector power supply
6. Connector audio/video-cable
099-080